image
image

Product Information

Precast stair units are typically 6″ to 8″ thickness depending on the projects requirements.  Units are cast in steel adjustable forms, number of treads, maximum rise and run and tread kicker shape should all be verify with precaster to reduce cost of custom forms.  Stairs are available in closed riser, half riser and cantilever design.

image
image
image
image

Standard Design Options

  • Precast stairs erected immediately after supporting structure is complete eliminate the need for temporary stair systems.
  • Adjustable steel forms allow for different tread rise/runs.
  • Stairs can include cast-in tread warning strips or recesses for post erection installation.
  • Precast stairs are extremely durable and maintenance free.
  • Connections can be designed for top of landing access for ease of installation.
image image
image image image image

3D Viewer

3D Viewer Tools

 

  • 3D Viewer Functions:
  • Move, Span, Zoom Assemblies
  • Isolate Single Components in View
  • Explode Assembly Single Components
  • Use Markup to Sketch Details
  • General Measurements for Concept
  • Print Views

Need More Info?

We Are Here to Help

 

Have a question, need a budget or detailed schedule?  Knife River sales team is ready to discuss precast solutions for your project.  Reach out to our staff below :

Image's Alex Sari

Alex Sari

Outside Sales Representative

phone

(509) 992-5614

 linkedin

LinkedIn

Image's Zak Perkerewicz

Zak Perkerewicz

Outside Sales Representative

phone

(503) 545-3284

 linkedin

LinkedIn

Finish

Finishes

Resources

Learning Center

Product Family

See featured product related to Stair precast products

All Products

Hollowcore

Hollow Core Planks are used as horizontal structural members for floor and roof applications such as podiums, mid-rise buildings, Controlled Atmosphere Apple Storage, parking structures and storm water detention vault lids. The benefits of Hollow Cor...

View Product
Hollowcore

Column

Precast concrete columns can be designed as single or multi-story units, up to 40+ feet tall depending on project needs. Column length is often dictated by the onsite crane size (stick or tower cranes may be used) and columns can be stacked using spl...

View Product
Column

Double Tee

Knife River’s double tee precast units are designed to maximize span to depth ratios, achieving spans up to 80 feet long. The long span capabilities make them ideal for parking garage drive aisles, industrial/data center floors, and roof system...

View Product
Double Tee

Stadia

Precast stadia products include Risers, Raker Beams, Vomitory/Header Walls and on some projects stairs, solid walls and shear walls.  Precast Stadia is a common framing system design due to the inherit structural performance of precast concrete plus ...

View Product
Stadia

Beams

Precast/Prestressed beams can be fabricated in almost any shape required for your project.  The most common shapes are inverted tee, L-shaped and rectangular profiles.  Precast/Prestressed beams are commonly used in parking structures, total precast ...

View Product
Beams

Voided-Solid Slabs

Voided Slabs are typically used for 15-85′ bridge spans but can be used in building applications where significant design loads are required. Voided slab design allows for a typical 4′ width slab to include integral voids which reduce the...

View Product
Voided-Solid Slabs

Tri-Deck

Tri-Deck girders are an adjustable top flange width, multi-stemmed unit designed for full deck use. Tri-Deck bridges are typically used for bridge spans from 30′-52′ which require a longer span and lower profile section. Typically Tri-Dec...

View Product
Tri-Deck

WF Girder

The wide flange (WF) girder is the primary bridge girder section used by Washington State Department of Transportation (WSDOT) and Idaho Transportation Department (ITD). WF Girders are typically used in spans of 70-200’ using sections ranging from 36...

View Product
WF Girder

Projects

Commercial

Industrial

Institutional

Residential

Transportation